by | Sep 4, 2026 | Southern Sandblasting & Painting
Installed industrial and municipal concrete sealing typically runs $1.50 to $5.00 per square foot, with basic densifiers at the low end and epoxy or polyurethane systems at the high end. The single biggest swing factor isn’t the coating you pick. It’s surface...
by | Sep 3, 2026 | Southern Sandblasting & Painting
For large new fabrication, abrasive blasting is the right call. For field welds, tight access, or spot repairs, mechanical power tools or a grit-free impact tool get you there without containment headaches. Acid pickling belongs in a controlled shop, on complex...
by | Sep 2, 2026 | Southern Sandblasting & Painting
For concrete floors, specify a textured epoxy or polyurethane system with broadcast aggregate, or a cementitious overlay for heavy wear zones. For metal, specify a properly prepared, primed textured coating or a thermal-sprayed finish. Before you sign anything, ask...
by | Sep 1, 2026 | Southern Sandblasting & Painting
Installed industrial protective coatings typically vary widely in cost depending on system and exposure, but that number alone will mislead you. The right way to budget is cost-per-year of service life, not the lowest bid on the page. TL;DR: Complete quotes should...
by | Aug 31, 2026 | Southern Sandblasting & Painting
The Bresle test extracts water-soluble salts from a steel surface and measures the extract’s conductivity to estimate NaCl-equivalent surface density, expressed in mg/m² or µg/cm². Inspectors run it after blasting, before coating, as a go/no-go checkpoint. A valid...
by | Aug 30, 2026 | Southern Sandblasting & Painting
Rope access painting is a sound choice for most mid-rise and high-rise commercial exterior work, and often the fastest way to get quality coverage without shutting down the property, as shown by Cape Apex Painters’ high-rise painting expertise. It works when two...